Audi remapping in context
Many Audi engines are shared with other Volkswagen Group brands, but software, gearbox and hardware can differ. S tronic dual-clutch gearboxes and tiptronic automatics have their own torque limits and control units, which may need consideration alongside an engine calibration.
quattro all-wheel drive models put extra demands on the drivetrain, and larger SUVs used for towing need careful condition checks.
Before remapping an Audi
We check for stored faults, boost and fuelling behaviour, gearbox condition and, on diesels, DPF and EGR health. Higher-mileage TDI engines used for short trips often show DPF-related history that needs addressing first.
Is my Audi suitable?
Suitability depends on the exact engine, control unit, gearbox and software version fitted to your Audi, and on its condition. Two vehicles with the same badge can have different hardware or software, so we always check against the registration rather than the model name. We also ask about previous remaps, tuning boxes and any warning lights, because they change what we can sensibly recommend.
If your Audi is not a good candidate — for example because of an unresolved fault, a worn clutch or a DPF that is already struggling — we will explain why and what we would suggest instead. We do not publish model-specific power or economy figures.
How we approach Audi remapping
We start with suitability rather than a sales pitch. Before any calibration is written to a control unit we want to know the vehicle is healthy: existing fault codes, boost or fuelling problems, a slipping clutch, a worn gearbox or a blocked DPF all need to be dealt with first, because tuning is not a substitute for repair and can make an existing weakness more obvious.
Where the vehicle is supported we explain what the proposed calibration is intended to change, what checks are needed and what the agreed scope of work includes. We do not publish universal power, torque or fuel-economy figures, because results depend on the individual vehicle, its condition, its software and how it is driven. If a remap is not the right answer for your vehicle, we will tell you.
What to send us before booking Audi remapping
The quickest way to get useful advice is to send the registration and a short description by WhatsApp or through the quote form. Support and suitability vary by engine, gearbox, control unit and software version, so a registration lets us check the right information instead of guessing. Any estimate given remotely is provisional until the vehicle has been seen and the required checks are complete.
- 01Vehicle registration and approximate mileage
- 02Make, model and engine size, if known
- 03Any warning lights, messages, symptoms or fault codes
- 04Existing remaps, tuning boxes or hardware modifications
- 05How the vehicle is used — commuting, towing, short trips or heavy loads
- 06Whether the vehicle is currently in limp mode or will not start
Visiting the workshop for Audi remapping
All work is carried out at our single workshop at Unit 2, Lancaster Works, Kingsbridge Road, Manchester M9 5SP. We do not run a mobile remapping service and we have no other branches, so every Audi remapping enquiry is booked into the same Manchester workshop. Visits are by arrangement: please call or WhatsApp before travelling so we can confirm the vehicle, the time and what the visit will involve.
Access is through the black gate. Call when you arrive so we can let you in, then keep left towards the rear of the site. We are open Monday to Friday 8am–6pm and Saturday 8am–1pm, and closed on Sunday. If the vehicle is in limp mode, showing a serious warning or will not start, tell us before setting off so we can talk about whether it is sensible to drive it or whether transport should be arranged.